   .  .  
 


              .       ,    ,     ,    ,    .    Technology,    Business and Legal Issues.       . .     .





    .   .

  



  



   , 2026



ISBN 978-5-0070-5875-9

     Ridero





   
  
  ,    .
-
2026




Part I. Technology





ISSUE I


      ,     , ,    ,      . , ,   ,       !    ,        .       (   ).   .   Ridero.      ,    .     .         (... , ).       !



1. Open the brackets. Use the correct form of the Verb (Active or Passive) *.



1. In this field, geologists ______ (to collect) core samples every quarter for quality control. 2. The stratigraphic column ______ (to update) annually after the new well logs arrive. 3. Data from the seismic survey ______ (to process) in the central lab before distribution. 4. The team ______ (to meet) on Mondays to review the latest interpretation. 5. Contamination risks ______ (to minimize) by using sealed containers during transport.



2. Put the correct form of the Verb. Explain the use of the Verb.*

regular actions, facts, timetable, laws of nature, common practice, action at the moment described.



1. The shift _____ (to start) at 7:00 sharp. The team ______ (to assemble) in the logging tent, where the core trays _____ (to lie) ready. 2. Every morning, the senior geologist _____ (to review) the previous days photos and ______ (to compare) them with the new core sections. 3. In this region, the sandstone layers _____ (to alternate) with thin shale beds; this pattern _____ (to reflect) the ancient shoreline shifts. 4. The magnetic susceptibility meter ______ (to measure) small variations which often ____ (to indicate) subtle mineral changes. 5. We ______ (to sample) every third metre of core, but the lab _____ (to require) extra samples if the lithology _____ (to change) abruptly. 6. The field database ______ (to update) daily, and the supervisor _____ (to send) a summary to the office each evening. 7. Geologists _____ (to use) both visual logging and handheld XRF for quick elemental checks. 8. Tomorrow, the shift _____ (to start) at 7 as usual.



Vocablary:

shale beds   

the core trays    

core sections     

magnetic susceptibility meter    

XRF   

visual logging    


3. Open the brackets, choose the correct form of The Verb (Present Simple, Present Perfect, Present Continuous). Explain.

1.She ________always __________ (to put) a spanner in the works! 2. The cost of supplying the electrical energy _________ (to depend) not only on the kWh. consumed, but also on the power factor of the load and the maximum demand. 3. He ______________ (to be) ill for three months. 4. What _______ (to be) the symptoms of frostbite? What is hypothermia? 5. The error-detecting system _____________ (to be) in effect! 6. The trade union _______________ (to signal) that the workers will strike! 7. They ______________ (to work) to dewater the well now. 8. The launcher ________ (to be) a funnel shaped section of pipeline where the pig is inserted and it ________ (to launch) the pig into the pipe. 9. A muster point ________ (to be) a place where people are ordered to go in the event of an emergency so they can be accounted for.



4. Open the brackets and use the correct Verb form (Past Simple, Past Continuous, Past Perfect). Pay attention to the category of Voice.



Once hypothermia affected him, he __________ (to feel) hunger and nausea. But it was only a start

Why _______ (to be) this day so ordinary that further events were not to be predicted? Stieve _______ (can) have prevented himself from being heavily distressed and laid down by that severe storm which_______ (to bring) frost and darkness to leave him alone in the forest among the fluffy white trees, pending over the figure of a lonely man. Not only he didnt expect how long and strenuous the day _________________ (to be going to be), but also how much energy it would cost to get it ended.

From the early morning, he was all into his working routines and ____ carefully ______ (to register) every operation. The logs _____ always _____ (to check) by Sue Chally, who was assigned to do that. So, they ________ (have to) be accurate and concise, otherwise, she would tell them off. Stieve Crimson knew her very well as they _________ (to work) for the same company for 10 years. Another members name was Rob Wizzly; that day he was out in the town, having taken a snowmobile..

The station had been built during the exploration phase. Now it was accommodating a team of 68 people, working on a rotational basis to ensure the equipment consistent operation, its maintenance, and order in general in this sector. There were 3 blocks, mainly consisting of cabins. An accommodation section with a living area, a generator, and a gas boiler room (for internal needs), a workshop block, and a gas facility station (the main responsibility and focus of attention of the team).

Todays 12-hour shift was quite dull. At 4 p.m., it was Stieves turn to make the bypass. He took an instrument kit, a lighter, a camera, and ______ (to go) out for a round. Projecting to finish the round within an hour, Stieve didnt consider this utmost to be any serious trouble, so he refused to take gloves and wear winter dungarees, which, actually, wasnt necessary working inside the cabin. The cabins_______ (to serve) as an office, a home, a laboratory etc., while a barn nearby  as a garage and a shed. . Sues burden was mostly administrative work; and she _________ (to warn) him against possible changes in weather conditions, but he wouldnt listen.

It __________ (to get dark) quickly; the wind ruffled up white flakes around, whirled them up and was twisting; along the path immediately rose piles of snow. Icy stormy gusts ___________ (to sting) his face; it was increasingly difficult to move; by the time he finished, he felt fatigued and mentally exhausted; eventually, he dropped a lighter and had only a phone to be a navigator in the looming night. Why didnt I listen to Sue? he _______ (to think). Had I listened, I ______________ (to get) into trouble. His hands ___________ (to ache); but the pain wasnt throbbing, it was just the skin to sense tingling bites of that awful weather which led him away from comfort, diverting from the right way. And numbness It seemed that his blood vessels ___________ (to constrict) and couldnt let the blood stream and warm his body The fingers were red and dry, and felt as if they were alien Why ______the gloves _____________ (to leave) in the cabin? How could he be so reckless?

He suddenly ______ (to come across) a sign. No loitering it said. What?! This sign was supposed to be located on the path near the other pipeline sector It was parallel to road 1. There were three roads, in fact, 1  from their station, running across the country to the town; 2  along the mains gas pipework, and the third one  towards the bridge. Road 2 was where he was supposed to be. But startlingly, he was quite far

To his horror, Stieve understood he ______ (to get lost) and imagined himself peripatetically travelling around the forest until he finds his death. Lethargically, he turned back; he ____ (to be) about to lose his heart. Panic was chasing his steps. Atop, as high as he could never rich, the Moon was slowly sailing across the sky, dimly seen, mysterious, fiendishly beautiful and cold. Totally ignorant of his sufferings. These sufferings couldnt interrupt her meditation, as well the earthly winds of winter

No loitering It ______ (to warn) against the dangers of the river, deceptive swamps, and wild animals. In the distance, probably, the bridge was sleeping, deeply under the snow The bridge! If it was there, to his right, then, to his left  in just 400 metres  was the station. He decided to head for the camp and turned left. Come what may

On his way, Stieve ________ (to realize) that numbness appeared in all his body, as well as headache and nausea; trembling, Stieve _______ slowly ________ (to rove) towards the destination, which should have already been seen. And he saw it! 200 meters! In the vicinity of the station, he felt relief. Thats it! As soon as he got in, Stieve immediately had a glass of warm water. He put his hands into a bowl with the room temperature water and then added more  warmer, so the extremities didnt hurt. They gradually were regaining their normal colour and sensitivity. But where was Sue?! She ____________ (can, to be) far! She couldnt have left to search for him! . Suddenly, Stieve _________ (to hear) the door screeching. It was Sue! She was just after him.



5. Write 4 forms of the Verbs.



Example: to put  put  put  putting

To panic 

To picnic 

To mimic 

To snowshoe 

To rescue 

To sink 


6. Use proper Verb forms in the sentences (Reported Speech).

1. Put a bandage over your arm.

Jim recommended Abby

2. Keep the workplace clean.

John told Andrew

3. Get your workers to use the PPE.

Anna commanded Lenny

4. If you use a walky-talky, you should speak clearly and in short sentences.

Abby mentioned that

5. I am an electrician. I work on anything and everything electrical in the oil industry.

Carlos Sanchez said that

6. If there is a spark in the area with flammable gas, of course there can be an explosion.

Carlos Sanchez confirmed

7. He is suffering from cold exposure.

Sue told a doctor that Stieve

8. We followed the usual procedure. We reported the spill immediately.

Sue said that

9. Our company has a wildlife protection program. We studied grey whales before we started drilling.

Rupert told the press

10. Make sure that the electricity is off before you touch him.

Jim told John



7. Choose 46 questions which a doctor should ask on receiving an emergency call if some incident happens on a construction or a production site and a worker is injured. Make dialogues with these questions.

Is he breathing? Can he talk? Does he have a family? Does he have medical insurance? Is he bleeding? Does he have a driving license? Can he move? Is it raining? Is it safe for doctors to be there? Is he in pain? Is he conscious?



8. Make Disjunctive Questions.

1. Lets call an emergency service, ___________?

2. He isnt in pain, ____________?

3. It was an electric shock, __________?

4. Give him painkillers, _____________?

5. The area has been cleaned, __________?

6. Fire extinguishers are in places, ________?

7. We shall take him to the hospital, _________?



9. Use the most suitable Modal forms.

1. You __________ (cant, must, may) work more than 12 consecutive hours. 2. You ___________ (have to, should, can) make the bypass every 4 hours. 3. A line rider ____________ (need to, may) carry the tools and detectors and report the trouble immediately. 4. A well tester _________ (must, may) exercise due diligence doing the job and accurately measure, register, report the flow rate of the well. 5. The project __________ (may, need to) get the contractor a foothold in the oil and gas sector. 6. Plunger lift uses gas pressure to remove excess fluid from gas wells so that gas production ________ (can, need to) continue.



10.Read the sentences. In brackets, find the meaning of the words and expressions in bold*.

1. When the drilling hit pay dirt on the first try, the whole crew were over the moon. (incredibly happy, far away).

2. The offshore helicopter lands here once in a blue moon  only when the weather is perfectly calm (monthly, very seldom).

3. Dont ask for the moon  we cant get spare parts delivered before tomorrow (an expensive trip, a difficult thing).

4. The contractor promised the moon, but were still waiting for the basic equipment (time, much).

5. Hes been a bit moonstruck ever since the night shift rotation changed (dizzy, distracted).

* hit pay dirt     ,  .



11. Match.

1. UT ____ a. Floating Production Storage and Offloading

2. MFL ____ b. Emergency Action Plan

3. ROV ____ c. Magnetic flux leakage

4. GIP _____ d. Remotely Operated Vehicle

5. EAP _____ e. Self-contained breathing apparatus

6. IDIOT ____ f. Electrical velocity analyzer

7. EVA _____ g. Deadweight Cargo Capacity

8. DWCC ____ h. Instrumental Digital Online Transfer

9. SCBA _____ i. General Protective Equipment

10. FPSO _____j. Personal Protective Equipment

11. PPE ______ k. Ultrasonic Testing

12. GPE _____ l. Global Positioning System

13. GPS ______ m. Gas In Place



12. Arrange the following words and expressions into groups according to their communicative function in a text. One word or expression might have more than one use. Make sentences to illustrate the use of these discourse markers.

1. Author wants to compare.

2. Author wants to show alternative.

3. Author wants to specify the time of the event.

4. Author wants to generalize.

5. Author wants to underline resemblance.

6. Author wants to emphasize differences or special features.

My overall opinion, or, totally, alternatively, after, to sum up, before, as important as, just like, in a similar way, unlike, when, in the bygone times, looking back, until, on the whole, otherwise, in spite of, another opportunity, two decades ago, so far, since, just like all outstanding scientists, whereas, meanwhile.



13. Read the example. Make short dislogues to express mutual consent. Complete.



Example:

 I like Stieve!

 Do you?

 Yes. I do!

 So do I!


1.



 I am looking for block A.

 Are you?

 Yes, I _____!

 So ____ I!


2.



 I have completed my exmination test!

 _____ you?

 Yes, I ______!

 So _____ I!


3.



 People worry!

 ____ they?

 Yes, they _____!

 So do the dogs!


4.



 This generator is out of service!

 _____ it?!

 Yes, it _____

 and so ____ that


5.



 The riggers on station Z were not supplied with enough food.

 ________ they?!

 No

 Neaither were the riggers on station Y


6.



 This time tomorrow we will be airborne.

 Will you?

 Yes, we _____!

 So, _______ the others!


7.



 I have never seen him so angry

 Havent you?

 No never

 Neither ______ anyone here


8.*



 I have lost my keys.

 ________ you? Havent you left them in a muster room?

 No. Ive put them right here. Im sure of it. And havent seen since then

 _________ has anyone. We will check every drawer.


9.*



 Ive never seen all the security feeds go dark at once.

 _________ you?

 No. Even the backup system should have kicked in.

 ________ has the control room. They lost the signal ten minutes before we did.


10.*



 Ive never heard the emergency broadcast repeat the same message for hours.

 _________ you?

 No. Its just static now.

 _________ has anyone. Nothing tuned in from the other side of town. The signals dead everywhere


P.S. Write Geographical Names

Russian Noun. English Noun. English Adjective. Nationality.







 



P.P.S. Write translation. Match these places to the countries.

Washington DC, Texas, Arkansas, Dallas, Ottawa, Toronto, Montreal, Vancouver, Detroit, Silicon Valley, Canberra, Sydney, Melbourne, Perth, Adelaide, Wellington, Auckland, Christchurch, Rotorua, Alberta, Edmonton, Montreal, Port Arthur, Cushing (Oklahoma), Port Fourchon, the Gulf of Mexico, Bakken, Karratha, Gladstone, Pluto, Wheatstone, Marsden Point (Whangarei), Taranaki Basin.

___________________________________




ISSUE II


1. Make questions to the following sentences using these Pronouns: who, what for, how fast, why, how long, when.



1. Inspectors inspect the pipes. 2. Welders join the sections of the pipework. 3. Workers paint the pipe. 4. Pipe-fitters prepare the pipes and put parts together. 5. Pipe-fitters assemble the parts. 6. Pipe-fitters read the plans.



2. Use The Auxiliary Verbs to change the sentences and make them emphatic.

Example: Welders do use electric power to weld!



1. Weld dry! 2. Welders wear a helmet to protect eyes and head. 3. The arc melts the pieces of metal. 4. Connect the new hose to the pump! 5. Use the PPE handling chemicals! 6. You need to tighten these loose bolts. 7. Yesterday, we painted the pipework.



3. Read the dialogue and do the tasks.



Sue: This meeting wont last long. We have only one question on the agenda. Yes, thats room 4 B, a tool storage.

Rob: Whats wrong, Sue?

Sue: The door wasnt locked this morning. I got in at about 11 and saw the instruments on the counter: pliers, a power drill, a screwdriver kit, cables and bolts

Rob: That must have been Andrew. I saw him coming out yesterday evening. Approximately, at 5 p.m.

Stieve: I saw Carlos with an instrument kit today, in the morning. At 9 a.m., he was going to 4 G, probably to check the cables. A couple of days ago, he said he had noticed some problems with an electric circuit. He was planning some repairing.

Lenny: He also told Andrew that he was going to troubleshoot all the stations of block 4.

Sue: Yes, I heard this too. But when I talked to him, he wanted to take a snowmobile and inspect pipe section 22. It was about 9:30.

Rob: All five rooms of block 4? This is 4 A so he is very likely to appear here soon. Hm Shall I take the dogs? This will facilitate the examination and repairs.

Sue: Good idea, Rob. But I have taken the key to 4 B. They are on the same ring as 4 C. All rooms of block B are located next to each other, so, I believe, we will see him here soon. No chance to miss him! Rob, do take the dogs! Stieve, check the generator. Andrew, go to 4 G and remove the petrol cans. I will talk to Carlos, then help Andrew.



3.1 Questions: How many rooms are there in block 4? _____Who was going to examine the electric circuits and carry out necessary maintenance? _________Where was Carlos at the time of briefing? __________



3.2Match the room with its number.

4 A _____ Garage

4 B ______ Kennels

4 C _______Workshop

4 D ______Tool storage

4 G _______ Muster room



3.3 Answer the questions.*

1. Why was Sue worried about room 4 B?

2. Who did Rob think might have been in the tool storage room?

3. What was Carlos planning to do with electric circuits?

4. Why did Rob want to take the dogs?

5. What did Sue have that was important for access to rooms 4 B and 4 C?



3.4 Match the sentences with what they express.

1. Certainty +++ ______ a. Andrew is very likely to see Carlos first

2. Possibility + ________ b. Rob cant have taken the keys of 4 B

3. Probability ++ ________ c. Carlos must have taken the keys

4. Negative possibility ____d. Sue may have missed Carlos as she was busy in the office

5. Ability _________e. Rob was able to handle the dogs himself



Write 23 recommendations to Carlos, starting with You should have + V3 to help the team avoid misunderstanding in the future.



4. Use the proper Future forms of The Verb.

1.The examination procedure _______________ (to finish) by 3 p.m. At 2 p.m., ___________ (to have a meeting). 3. He ________probably _______ (to return) by 6. 4. _________ I air the room and clean it? 5. I ___________ (to report) the incident immediately! 6. Please, drain the hose, ________ you? 7. _______ you go to the canteen or _________ you stay in cabin A 2? 8. By 7 p.m., we ______________________ (to repair) the cable for 5 hours. 9. Lets search the main building, _______we? 10. I am sure, we _________ (to find) the key.



5. Use proper Prepositions of Movement and Direction.

1.Where are you going _____? 2. Go ______of the main building, then turn r ___ t. 3. Go s______t, then take the second r ______t. 4. In front _____ A3, you will see the gas boiler station. 5. At the junction, turn l ____t. 6. Go _______ the gate. 7. Run _________ the field. 8. Drive _________ the pipeline. 9. Move ______the street. 10. Stop ______ the corner.



6. Use The Present Continuous Tense (or The Present Simple). Identify the function.*

1. The pressure in the line __________ (rise) steadily. We need to reduce the flow. 2. The temperature of the wellhead __________ (drop) as we increase the cooling rate. 3. This month, we __________ (run) extra safety drills because of the new regulations. 4. The inspector ______ (come) tomorrow to check the storage tanks. 5. We _____ (start) the maintenance shutdown next Monday. 6. Normally, Alex works on the north platform, but this week he __________ (help) the drilling crew. 7. Usually, the lab does weekly tests, but right now they __________ (analyze) an urgent sample. 8. Listen! The pump __________ (vibrate) unusually loudly. Lenny should check it. 9. The contractor _______ (arrive) at 3 p.m. to inspect the valve. 10. Right now, the control room operator __________ (monitor) the pressure in pipeline 3. 11. Be careful: the team __________ (clean) the spill zone, the floor is slippery. 12. Oil prices __________ (go up) again, so the project economics looks better.



7.Use a proper Conjunction (until / not until). Pay attention to The Inversion.*

Example: The crew will not start the pump until the pressure readings are verified.  Not until the pressure readings are verified will the crew start the pump.



1. We cannot release the valve _____ all personnel confirm they are clear. 2. The rig will remain offline _____ the safety inspection is completed. 3. _______ the safety inspection is completed will the rig be brought back online! 4. Maintenance will not proceed ________ the lockout-tagout procedure is fully documented. 5. _______ the lockout-tagout procedure is fully documented, will maintenance be allowed to proceed! 6. No new drilling phase will begin ____ the geological report is approved. 7. ________ the geological report is approved will any new drilling phase be authorized.



7.1 Read and translate. Explain the use of The Inversion. Write the numbers of the sentences where it is used.



1. Only after they had finished welding, did they go into the cabin.

2. Such a cold day was it that they had to get the dogs to stay in the main building.

3. Carlos had no idea that the team were looking for him.

4. On no account will Sue let them miss the briefing.

5. Not till the last wire had been examined could they have some rest.

6. Never had Stieve had such a terrifying experience.

7. Little did he know what his decision would lead to.

8. It was such a nice day that he went out without wearing warm clothes.

9. On no account would Jack have let this happen if he had predicted the consequences!

10. Under no circumstances were they granted access to the premises.



8. Explain the use of The Conjunctions (until / lest). Pay attention to The Category of Mood.*

Example 1: The technician tightened the coupling bolts thoroughly, lest a vibration-induced leak develop during operation.  lest       ,     .    ,   .

Example 2: No technician will be allowed to access the unit until the isolation procedure is confirmed by the shift supervisor.   until      (   ),    .



Vocabulary:

isolation procedure   

coupling bolts   

weld seam   

sump  

pressure spikes   

lube oil flow    

bypass valve   

bearing seizure   

flushing procedure   

isolation tags    (LOTO)

compartment  

pressure leak    

gasket  , 

gas detector  

flange joint    (   )


1. They inspected the weld seam again, lest any micro-crack be overlooked before the hydrotest. 2. The operator kept the emergency drain open, lest the sump overflow under sudden pressure spikes. 3. The maintenance team will not restart the compressor until the oil pressure reaches the nominal value. We will keep the bypass valve closed until the pressure test is completed. 4. Before starting the turbine, the engineer double-checked the lube oil flow, lest bearing seizure occur due to insufficient lubrication. 5. No personnel will be allowed in the work zone until the gas detector confirms safe levels. 6. Until the seal replacement is verified by the supervisor, the pump will remain offline. 7. Until the line pressure is confirmed stable, the crew will not start the flushing procedure. 8. The engineer inspected the gasket again, lest a seal failure happen under thermal stress.



8.1 Use constructions with the conjunction lest instead of the given sentences.

1. The technician replaced the old gasket with a new one to prevent leaks. 2. Before reassembling the flange joint, inspect the gasket surface for cracks or deformation. 3. The operator double-checked the pressure relief valve settings to prevent an overpressure event during the startup sequence. 4. The supervisor ordered a double verification of the isolation tags to avoid the unit re-energizing during maintenance. 5. They kept the emergency vent line open not to enable vapour accumulation. 6. We should not allow vapour accumulation as it creates a hazardous atmosphere in the compartment. 7. We tightened the bolts to prevent vibration. 8. Ensure all isolation tags are signed and dated by the responsible supervisor; otherwise, the tags are considered invalid. 9. All flanges must be torqued to the specified value; otherwise, a pressure leak may occur. 10. Verify that the bypass valve is closed before the pressure test; otherwise, the test results will be invalid. 11. The gasket must be replaced with a new one of the specified material to ensure a pressure-tight seal. 12. Disassembly of the flange joint shall be performed only after isolation and depressurization to avoid injury, release of hazardous media, or unexpected movement of components. 13. All flange joints in the high-pressure section shall be torqued according to the table in Appendix B to avoid a pressure leak under operating conditions.



8.2 Use one of the Conjunctions (otherwise, providing that, in case). In some cases they are interchangeable. Explain the meaning.

Example: consequence, test invalid, contingency, failure possible, condition, access granted.



1. The technician replaced the old gasket with a new one; ________, a pressure leak might occur during the hydrotest. 2. Ensure the bypass valve is closed before the pressure test; _______, the test results will be invalid. 3. Temporary bypass operation is permitted, ______ that continuous monitoring is maintained and a written waiver is filed. 4. Have a spare gasket ready ______ the existing one shows signs of deformation during disassembly. 5. All flanges must be torqued to the specified value; ______, uneven loading may deform the gasket and compromise the seal. 6. Maintain the flare system on standby _____ of an unplanned pressure release. 7. Verify that the isolation tags are signed and dated; _______, the work cannot be authorized. 8. Provide a secondary pressure gauge ______ the primary instrument fails during the test. 9. Access is granted, ______ that the tag is properly signed and dated. 10. Keep a repair kit nearby _______ a leak develops. 11. Keep the relief valve accessible _____ pressure spikes unexpectedly.



9. Use a proper Conjunction (until, unless, lest, not until).*



1. The rig crew will not begin tripping pipe ______ the well control checklist is signed by the drilling supervisor. 2. We cannot authorize the night shift overtime ______ HR confirms the staffing waiver. 3. The technician tightened the flange bolts twice ______ a pressure leak develop during the hydrotest. 4. ______ the lab results confirm the corrosion rate is below the threshold, no permanent repair will be approved. 5. The flare system will remain on standby ______ the gas flow stabilizes and the analyzer shows safe levels. 6. We will not remove the lockout-tagout devices ______ every authorized person has been notified, and the area is declared clear. 7. The crew will remain on standby ______ the spill response team confirms the containment is secure. 8. We cannot authorize any overtime, ______ the site manager approves the request in writing. 9. _______ the site manager approves the request in writing can we authorize any overtime! 10. ______ the safety audit is completed, no new drilling phase will be started! 11. We will not release the pressure, ______ all personnel are at a safe distance! 12. The contractor was told to delay the cement job ______ the formation data is revalidated.



10. Find the equivalent to the words given. Write down your answers.

		1. Velocity ____ a. Surrounding area
		2. Viscosity ____ b. Relationship between mass and size
		3. Affinity _____ c. Thickness of liquid
		4. Density ____ d. Similarity
		5. Vicinity _____ e. Speed

11. Match.*

1. HSE _____ a. Personal Protective Equipment (  )

2. LOTO _____ b. Key Performance Indicator (  )

3. PPE _____ c. Health, Safety, and Environment ( ,   )

4. KPI _____ d. Lockout/Tagout (  )

5. SDS ______ e. Safety Data Sheet (  )



12. Read the lines. Choose one option to meet your professional context.

1. husky _______ a. ; . ; .  .

2. alligator ______ .  ; . ; . .

3. wild cat ______ .  ; .  ; .  .

4. Christmas Tree ______ .   ; . ; . .

5. pig _____ . ; . ; . .

6. dogleg ______ .   ; .   ; .   .

7. hulk _____ .  ; . ; . .

8. dog house _____ . ; . ; . .

9. a go-devil ____ . ; . ; . .



P.S. Write Geographical Names

Russian Noun. English Noun. English Adjective. Nationality.





























P.P.S. Match these places to the countries.

, , , , , , , , , , , --, , , -, , , , , , , , , , -.

___________________________________




ISSUE III


1. Find the Russian equivalent.



1. paraffin _____ a. 

2. benzene ______ b.  

3. sodium ______ c. 

4. propane ______ d. 

5. mercury ______ e. 

6. proppant ______ f. 

7. magnesium _____ g. 

8. sulfur _______ h. 

9. nitrogen _______ i. 

10. silica _______ j.  

11. petrol _______ k. 

12. silicon _______ l. 


2.Read the definitions and choose the correct word out of two in bold.



1. A wildcatter is a prospector who drills wells in areas not known / well known to be productive.

2. A numbness is a lack ofsensitivity / oversensitivity in the parts of body.

3. Sour gas is a type of gas which contains a significant amount of hydrogen sulfide / carbon dioxide.

4. Vermiculture is a process that uses worms / chemicals to break down organic waste and turn it into a fertilizer.

5. A utility pig is used to remove debris / air and clean a pipeline / a well collar.

6. Shut-in period is the time in which gas pressure accumulates / condenses within a well to help cycle and operate a plunger.

7. A touchdown point is a destination / starting point of the pipe of the seafloor.

8. Brine is water full of salt / fish.



3. Read and choose one of two words in bold. Convey the ideas of the text briefly, write the annotation in your native language (1015 sentences) [16].



Explore 12 Types of Gas: A Comprehensive Guide.

Gas is a fundamental state of matter characterized by its lack of / prominent fixed shape or volume. Unlike / resembling solids, which maintain a definitive shape, and liquids, which conform to the shape of their containers, gases expand to fill available space, exhibiting a unique capability that allows them to take on various shapes. Additionally / Contrastingly, gas behavior can be compared to plasma, another state of matter, which consists of charged particles. Understanding gases is essential / helpful for various industries, as they play a crucial role in chemical reactions, energy production, and many natural phenomena. Pure gases, such as / unlike helium and oxygen, serve as foundational components in numerous applications, making a comprehensive understanding of types of gas critical for businesses.

Types of Gas

1. Monoatomic Gases

Monoatomic gases consist of single atoms that remain independent of one another. These gases are characterized by their simplicity and stability, making them fascinating subjects of study. Examples of monoatomic gases include noble gases such as Helium, Neon, Argon, Krypton, Xenon, Radon, and the recently / fortunately discovered Oganesson. Each of these gases has unique properties, such as low reactivity and a high degree of atomic stability. Their inert nature makes / states them suitable for various applications, including lighting and cooling systems. The uniqueness of monoatomic gases distinguishes them from other types of gas, particularly when considering their role in scientific research and industrial applications.

2. Polyatomic Gases

Polyatomic gases contain two or more atoms, allowing for a diverse range of molecular structures and reactions. These gases can be classified further into diatomic, triatomic, and tetratomic categories. Diatomic gases, such as Hydrogen (H


), Nitrogen (N


), and Oxygen (O


), are essential / to life and play a critical role in combustion processes. Triatomic gases like Ozone (O


) and Water vapor (H


O) are vital for atmospheric chemistry, influencing climate and weather patterns. Tetra atomic gases, such as / in contrast to Sulfur trioxide (SO


) and Ammonia (NH


), are extremely important / ancillary in industrial processes and / but not for businesses that work in sectors like renewable energy, environmental management, and chemical manufacturing.

3. Inert Gases

Inert gases are known / reportedly infamous for their lack of chemical reactivity, making them unique among the various types of gas. These gases, which include Helium, Neon, Argon, Krypton, Xenon, and Radon, are colorless, odorless, tasteless, and non-flammable. Their inertness allows them to be used in applications where reactions must be strictly controlled, such as in the preservation of sensitive materials or in controlled atmospheres for chemical reactions. The use of inert gases spans various industries, including electronics and food packaging. A thorough / Through understanding of inert gases is beneficial for businesses focused on innovation and quality control in their operations.

4. Toxic Gases

Toxic gases pose a significant risk to health and safety, making their understanding crucial for any business involved in hazardous materials. These gases can adversely affect / effect the central nervous system and require careful storage and ventilation to minimize exposure. Examples of toxic gases include Ammonia, Arsine, Boron Trichloride, Carbon Monoxide, Chlorine, and Sulfur Dioxide. Knowledge of these gases properties / ownership and safe handling practices is vital for industries like chemical manufacturing and waste management. Businesses must / can invest in safety protocols and training to protect employees and the environment from the dangers posed by these toxic gases. Awareness of the risks associated with toxic gases helps ensure / reach compliance with safety regulations and enhances community trust.

5. Natural Gas

Natural gas is a naturally occurring mixture of hydrocarbon gases formed beneath the Earths surface. It is colorless and odorless, with a highly flammable nature, making it a popular choice as a clean-burning fuel source. The primary components of natural gas include methane, ethane, propane, and butane, which / what can be transformed into various products. Businesses utilize natural gas in the manufacturing of plastics and chemical products, contributing to / interfering with its importance in many supply chains. Understanding the production, transportation, and utilization of natural gas can provide businesses with a competitive edge in energy management and sustainability practices.

6. Biogas

Biogas is a renewable energy source produced by the anaerobic digestion of organic matter, primarily in landfills and wastewater treatment facilities / purification stations. This type of gas consists mainly of methane, carbon dioxide, and small amounts of hydrogen sulfide. Biogas serves multiple / several purposes, including vehicle fuel, cooking, and electricity generation, making it an attractive option / lucky chance for businesses looking to implement sustainable practices. Its production not only helps in waste management but also contributes to energy conservation and greenhouse gas emissions reduction / recycling. As the demand for renewable energy sources grows, understanding biogas technology becomes increasingly critical for companies aiming to align with eco-friendly initiatives.

7. Liquefied Petroleum Gas (LPG)

Liquefied Petroleum Gas, or LPG, is a flammable mixture of hydrocarbon gases that remain in liquid form under pressure. Commonly used for cooking and as a vehicle fuel, LPGs versatility makes it an active player in the global energy market. Businesses often rely on LPG for heating and power generation, given its efficiency and cleanliness compared to other fossil fuels. The properties and applications of LPG can help companies optimize / improve their energy usage and contribute to reducing carbon footprints. The alternative fuels gaining popularity, the importance of LPG in the transition toward sustainable energy sources stands out / pays off.

8. Compressed Natural Gas (CNG)

Compressed Natural Gas (CNG) is primarily composed of / differs from methane and stored under high pressure for use as an alternative vehicle fuel. As businesses seek eco-friendly alternatives to gasoline, CNG has emerged as a reasonable choice due to its lower emissions and non-toxic characteristics. Its energy efficiency and cost-effectiveness make CNG appealing for fleet operators and transportation services. Apprehension / disregard of the infrastructure and technologies associated with CNG can empower companies to make decisions on their energy consumption and emissions reduction strategies. The transition to CNG can significantly enhance corporate sustainability / breakthrough efforts and lead to cost savings in the long term.

9. Real Gas

Real gases differ from / rival ideal gases in that they do not strictly adhere to the ideal gas laws due to / matching their molecular attractions and volume. Unlike ideal gases, which are simplified models that assume no intermolecular forces, real gases exhibit compressibility and variable specific heat capacity under different conditions. This distinction is vital for industries relying on gas behavior for process optimization and safety management. Businesses must account for real gas behavior when designing equipment and processes involving gases in order to prevent inefficiencies and enhance safety. A thorough study and recognition of gas properties helps / attains companies achieve better planning and execution in their operations.

10. Ideal Gas

The concept of an ideal gas is a theoretical model that helps scientists and engineers predict / gas behavior under various conditions. An ideal gas is defined / speculated by its adherence to the ideal gas equation, showcasing a direct relationship between volume, pressure, and temperature. While real gases exhibit deviations from this behavior, the ideal gas laws provide a simplified framework / manual for understanding the basic principles governing gas behavior. Businesses in industries such as transportation and chemical manufacturing can leverage these principles to enhance product efficiency and reliability. Recognizing the limitations / boundaries of the ideal gas model while utilizing its principles in practical applications is crucial for forward-thinking enterprises.

11. Elemental Gas

Elemental gases consist solely of one type of stable / well known element, such as Nitrogen (N


) and Oxygen (O


). Stability of these gases can vary depending on environmental conditions like / of temperature and pressure. Understanding the behavior of elemental gases is essential for industries that rely on specific atmospheric conditions, such as agriculture, pharmaceuticals, and waste management. Businesses must ensure that they maintain optimal conditions for the storage and use of elemental gases to guarantee product quality and safety. A deep / some knowledge of elemental gases can also inspire innovations lead to improved efficiency and effectiveness.

12. Gases Consisting of Different Elements

Gases that are composed / based of different elements serve various purposes across multiple industries. Carbon Dioxide (CO


), Water vapor (H


O), Nitrogen Oxides (NO


), and Sulfur Oxides (SO


) are prime examples of gases that combine different elemental compositions. These mixed gases can affect environmental conditions and influence climate change, contribute in the air quality management. Comprehension of the effects of behavior and impact of these gases in general is imperative for businesses focused on environmental responsibility / prospects and regulatory compliance. Awareness of the ecological implications of these gases can help companies develop effective strategies for mitigating their environmental footprint and encouraging sustainable practices.

Conclusion

In conclusion, its important to outline / outperform the differences between real and ideal gases. While real gases demonstrate complex behaviors that deviate from ideal conditions, ideal gases provide a foundational understanding of gas laws that can be applied across various fields of science and business. Moreover / however, the specification of CNG and LPG as types of gas highlights the significance of fuel choice in transportation and energy management. Businesses that prioritize a comprehensive understanding of gas types will position themselves as leaders in sustainability and innovation.



4. Arrange the following words and expressions according to their communicative function in a text. One word or expression may have more than one use.

Additionally, moreover, due to, firstly, contrastingly, however, they say, in my view, in fact, furthermore, owing to, because of, therefore, as far as I know, secondly, finally, reportedly, allegedly, opposingly, then, as, subsequently, consequently, for that reason, as a result of, leading to, it is for sure, after that, despite the fact, although



1. Author wants to add extra information or strengthen his arguments.

2. Author wants to show the order of or rank the arguments / events.

3. Author wants to emphasize causality.

4. Author wants to underline specific value of the opinion or statement (relevance).

4. Author wants to express concession.

5. Author wants to express contrast.



5. Match the meaning to the abbreviation.

1. CPR ______ a. liquefied petroleum gas

2. LDC ______ b. Good Delivery Practice

3. GDP ______ c. European Medical Agency

4. EMA ______ d. Food and Drug Administration

5. FDA ______ e. Local Distribution Company

6. LPG ______ f. cardiopulmonary resuscitation

7. IMO ______ g. catalytic fluid cracking

8. cv ______ h. International Maritime Organization

9. CFC ______ i. calorific value

10. VLCC _____ j. Ultra Large Crude Carrier

11. ULCC ______ k. Very Large Crude Carrier



6. Read the lines, cross out the odd word.

1. magnesium, Magna Carta, Mindeleev, molecular.

2. nitrogen, neutral, valence, voluntary.

3. sour, a la cart, sweet, desalinated.

4. shale, liquefied, maritime, natural, rich.

5. API, BTU, OPEC, FDA

6. underground storage, conventional reserves, international convention, seismic data, production zone.

7. capacity, bolted tank, thief hatch, cleanout plate, route.

8. oil spill, oil leak, oil seepage, oil production.



7. Match

2. ethane [i: ?e?n]  b.  (C


H


)

3. pentane [pente?n]  c.  (CH


)

4. butane [bju: te?n]  d.  (C


H


)

5. methane [mi: ?e?n]  e.  (C


H


)

6. propane [pr??pe?n]  f.  (C


H


)



8. Use discourse markers from exercise 4 to change the following sentences. Use a dictionary to vary your vocabulary and find more language means to emphasise coherence. Pay attention to the words in box below.*

Example: It is a fact that crude oil is classified by density and sulfur content, and these properties directly affect transportation methods.  It is a fact that crude oil is classified by density and sulfur content and this, therefore, directly affects oil and gas transportation methods.

Example 2: Barges are often used for short-sea and inland waterway transport of oil products.  On the one hand, barges are often used for short-sea transportation, on the other hand, for inland waterway transport of oil products.

Example 3: In coastal and shallow-water areas, smaller vessels and barges provide flexible logistics solutions.  Not only barges provide flexible logistics solutions in coastal and shallow-water areas, but also smaller vessels.



1.Light crude oil has a lower density and flows more easily; it can be moved via pipelines or standard tankers with fewer complications. 2. Heavy crude oil is viscous and requires heating or dilution with lighter hydrocarbons before it can be pumped or loaded into tankers. 3. High-sulfur (sour) crude oil is more corrosive, which means tanker tanks and pipeline sections need special protective coatings. 4. Bitumen, an extremely viscous form of heavy oil, is often transported by rail in heated tank cars or by specialized trucks rather than by conventional marine tankers. 5. Natural gas is mainly methane and is transported either as pipeline gas (in gaseous form) or as LNG (in liquid form) depending on the distance and infrastructure. 6. For long-distance overseas transport, natural gas is cooled to 160 C to become LNG, which drastically reduces its volume and makes sea shipping feasible. 7. LPG (liquefied petroleum gas), which includes propane and butane, is transported under pressure or refrigeration, and LPG carriers are designed differently from LNG carriers. 8. The difference in boiling points between propane/butane and methane means that LPG and LNG need separate storage and handling systems. 9. Shale gas and associated gas from oil fields may contain higher levels of impurities. They require processing before they can be safely transported by pipeline or ship. 10. Condensate, a light hydrocarbon liquid produced with gas, behaves like a light crude and can be shipped in product tankers, but it is highly volatile and needs careful handling. 11. The wax content in some crude oils can cause blockages in pipelines at low temperatures, so heating stations are installed along the route. 12. In cold climates, the choice between rail, heated tank cars, and insulated marine vessels depends on the pour point of the specific crude grade. 13. Blending different crude types at terminals allows operators to adjust viscosity and sulfur levels, making the mixture easier and safer to transport. 14. Selecting the right transport mode always starts with analyzing the oil or gas grade. This depends on properties like viscosity, sulfur content, and volatility which determine the required equipment and safety measures. 15. Loading operations at the terminal are coordinated by the stevedore team, which ensures that cargo is stowed safely and according to the vessels stability plan. 16. Before loading begins, the ships chief officer verifies the cargo manifest and checks that all items match the documentation. 17. Crude oil is pumped into the tankers cargo tanks via submerged loading arms to minimise vapour emissions and reduce the risk of static ignition. 18. The loading rate is carefully controlled because excessive flow can cause overpressure in the cargo tanks or lead to spills at the manifold connections. 19. Not only must the weight be evenly distributed across the tanks, but also the sequence of loading has to follow the ships tank plan to maintain the vessels trim and stability. 20 Ballast water is discharged simultaneously with loading in order to keep the ship at the required draft and prevent excessive stress on the hull. 21. Once the loading is completed, the chief officer records the final quantities, seals the tanks, and signs the bill of lading as proof of receipt. 22. Although modern terminals use automated flow meters and remote monitoring systems, manual checks by the ships crew are still required for safety and compliance. 23. In case of an emergency stop, the loading system is designed to shut down automatically, and emergency valves isolate the cargo lines within seconds. 24. Due to strict environmental regulations, any residual cargo or tank washing water must be collected in slop tanks and disposed of through approved shore facilities rather than being discharged at sea. 25. Ro-Ro loading uses a ramp so that wheeled cargo can be driven directly onto the vessel. 26. Lo-Lo loading relies on cranes to lift containers and heavy units onto the deck.




  .


   .

   ,     (https://www.litres.ru/book/raznoe/angliiskii-iazyk-v-professional-noi-deiatel-nosti-neft-i-gaz-prakti-74369552/)  .

      Visa, MasterCard, Maestro,    ,   ,     ,  PayPal, WebMoney, ., QIWI ,       .


