Common Objects of the Microscope

In some cases, however, it is desirable to examine and preserve delicate structures, or parts, or dissections, in a medium which allows of the retention of the greater part of the natural moisture, and in such a case the tissue is immersed in glycerine diluted very much in the same way as the alcohol in the last process, but with very much longer intervals between the alterations of strength, until it reaches pure glycerine, in which it remains for a considerable time, as the exchange between the tissue and the dense fluid surrounding it goes on very slowly.

A combination of the two methods is also possible, the spirit-hardening being carried out for a portion of the time, and the tissue being thereafter transferred to glycerine, diluted or pure.

The object of using glycerine at all is merely that it has a much lower refractive index than balsam, so that delicate structures may sometimes be better seen in the former medium, but balsam is to be preferred wherever it is possible to use it, i.e. almost always. The writer has not mounted a preparation in glycerine or a medium containing it for many years, nor, with proper staining, does he think it can ever be necessary to do so, except in the case of dissections in which the glycerine can be slowly run in without disturbing the arrangement, as spirit would be pretty sure to do. The harder portions of plants, woody stems, shells of fruit, or the like, require different treatment, and must, as a rule, be allowed to dry thoroughly before being cut.

Starch granules are somewhat troublesome to mount satisfactorily. The writer has tried many methods, and, on the whole, prefers a glycerin-gelatin medium, which keeps for an almost indefinite time, and may be made as follows: Thirty grains of gelatine (Nelson’s “brilliant” or other transparent gelatine is to be preferred) are allowed to soak in water, and the swollen gelatine is drained, and dissolved in the water which it has absorbed, by the aid of a gentle heat. An equal bulk of pure glycerine is then added. In using, a small portion is transferred to a slide with the point of a knife and melted, a small quantity of starch granules added, and stirred into it with a needle. The cover-glass is then laid up on the still-fluid drop, pressed gently down so that the drop is extended to the margin of the cover, and the whole allowed to cool. It is then to be painted round with several layers of Brunswick black, or Hollis’s glue, or zinc-white cement, to prevent evaporation,—Hollis’s glue being perhaps the best medium for the purpose.

Petals, or other parts of which it is desired to obtain a surface view, must be mounted in cells, which may be made by the use of button-moulds of suitable size, cemented to the glass slide with marine glue. The slide must be free from grease, as the tissue must be fixed in position by the use of gum, and allowed to dry thoroughly before closing the cell, or the cover-glass will be bedewed with moisture when the cell is closed. The best plan is, after air-drying for a couple of days, to place the preparation on a metal plate over a beaker of boiling water for an hour or more, and then to close the cell immediately with Brunswick black, maintaining the heat at first to ensure rapid drying, and then slowly withdrawing it. When cool, another coat should be given, and rather thick covers should be used, as these preparations are never required to be examined with high powers.

To mount pollen-grains, they should be sprinkled upon the surface of a slide which has been previously moistened with thin gum, and allowed to dry until it has become just “tacky”; the drying is then completed by gentle heat and a drop of balsam placed upon the grains, with a cover-glass over all. Bubbles will probably form, but with Canada balsam this is not of the slightest importance, as they always come out of their own accord, and balsam mounts should never be closed with cement of any kind until thoroughly dry.

Air-bubbles in other media may be eliminated by the use of the air-pump shown in Fig. 16, which may be obtained from Baker at a very reasonable rate, and which is useful not only for that purpose, but for accelerating the drying of moist tissues. To do this, there is placed upon the plate of the pump a porcelain dish containing strong sulphuric acid, and upon this is placed a little triangle of platinum wire, which serves to support the preparation. The air is now exhausted; the tissue parts with moisture to supply its place, and this moisture is in turn greedily absorbed by the sulphuric acid, so that drying is rapid and continuous, as well as very thorough, whilst the process has the great advantage of dispensing entirely with the use of heat.

Fig. 16.

Portions of many of the delicate algæ may be mounted in glycerine, having previously been soaked in it as already described; whilst the unicellular forms, such as desmids and diatoms, may be preserved in almost exactly the natural condition by simply mounting them in a saturated solution of picric acid.

Probably formalin, in a solution of 10 per cent. strength, would answer the purpose equally well, but the writer has not tried it. It is hardly necessary to say that, with such extremely fluid media, great care is required in closing the cell. A thin layer of Hollis’s glue should be first painted on, to secure the cover in position, and when this is thoroughly dry, several successive layers must be added in the same way.

It may be said here, that it is advisable in all cases to use circular cover-glasses, as far as possible, as they lend themselves with great facility to a mechanically accurate closure. This slide is placed upon a turn-table, carefully adjusted until the cover is seen to be central when rotated, and a brush, preferably a small camel-hair pencil, charged with the desired fluid, but not in large excess, is held against the junction of the slide and cover, whilst the table is rapidly spun. A little experience will teach better than any description what amount of fluid there should be in the brush, and how thick the cement should be. If too thick, it will drag off the cover; if too thin, it will flow over the latter and over the slide.

The preparation of diatom-skeletons as permanent objects is easy. Consisting, as they do, of pure silex, or flint,—i.e., practically glass,—they resist long boiling in acids, so that there is little difficulty in isolating them from any organic matter with which they are mingled. It is generally recommended to treat them with strong nitric acid. This is a mistake. The acid acts much more powerfully and less violently when diluted with an equal bulk of water, and it is in an acid so diluted that portions of water-plants, or other diatomaceous material, should be boiled in a glass beaker until all the organic matter is dissolved. The beaker should be covered with a glass plate, to prevent dissipation of the acid fumes. When the process is complete, usually in about half an hour, the contents of the beaker are thoroughly stirred with a glass rod, poured rapidly off into a larger bulk of cold water, and allowed to settle for another half-hour. The process is then repeated with a smaller bulk of water, several times, to allow the removal of the last traces of acid, and finally with distilled water. The separation of the diatoms into grades is effected by settlement. The final result is poured into a tall glass vessel, and allowed to settle for, at first, a minute, the supernatant fluid again poured off, and allowed to settle for two minutes, and so on, the period being gradually increased, and each sediment preserved apart. The first will probably only be sand, but the proportion of diatoms will increase with each separation, though there will always be a certain proportion of sand of such a size as to settle at the same rate as the diatoms. Marine plants especially will furnish a rich harvest by treatment as described.

Solid diatomaceous deposits, such as kiesel-guhr, mountain-meal, and especially the famous Oamaru deposit from New Zealand, demand different treatment, and perhaps the best way is to disintegrate the mass, either by boiling with Sunlight soap (though the alkali attacks the flint to some extent) or to mix the mass with a super-saturated solution of acetate of soda (made by saturating water with the crystals whilst boiling), and by successive coolings, heatings, and stirrings to cause the process of crystallisation to break up the mass, which it will do very thoroughly. The diatoms are then separated by sedimentation, as above described.

A small portion of the deposit may now be spread thinly on a glass slide, allowed to dry thoroughly, be treated with balsam, and covered.

If it be desired to select individual diatoms, this must be done under the microscope, by means of a bristle fixed in a handle either with glue or sealing-wax. The diatom selected will adhere to the bristle if the latter be slightly greasy, and should then be transferred to a slightly adhesive slide, coated either with thin solution of white shellac, or with thin gum nearly dry. When the forms desired are mounted, the preparation should be covered in balsam. The process is by no means as easily effected as described, however.

The preparation of insects, or parts of insects, as microscopic objects is a tedious and difficult task. The main point is the trouble of softening the integument and eliminating the colour.

The latter can, in any case, be only partially effected. The beginner would do well to begin with a fairly easy form, such as the worker-ant. A good supply of these insects may be placed in a bottle of liquor potassæ, and left there for at least some days until they begin to become clear and limp. From time to time a specimen may be taken, well washed with several waters, then with acetic acid and water of a strength of about 10 per cent., then with weak spirit, about 50 per cent. An attempt may then be made to arrange the insect upon a slide, spreading out the legs so as to exhibit them to the best advantage, and when this has been done a cover-glass may be put on, supported in such a way as to prevent absolute pressure. The spirit is then withdrawn by means of a piece of filtering-paper cut to a point, and strong spirit added. This is again succeeded by absolute alcohol, then by a mixture of turpentine and crystal carbolic acid in equal proportions, and finally the cover-glass is carefully lifted, and some thick balsam solution dropped on, the limbs finally arranged by means of warm needles, and the cover-glass carefully replaced and pressed gently down by means of a clip, which may be obtained for a few pence. The whole is then set aside to harden, the deficiency caused by evaporation made good, the balsam allowed to dry, and the preparation finally painted round.

The contents of the body, in large insects, must be removed, and this is effected during the washing in water by gentle pressure with a camel-hair brush, the process being aided, if necessary, by a small incision made through the integument at the root of the tail. Sections of insects require very special methods, which will hardly fall within the scope of this work.